Antminer S9-Hydro

Antminer S9-Hydro

€826,- VAT excl. €999,- VAT incl. In stock from October 5th. Delivery time: EU & Non-EU Order now

BITMAIN ANTMINER S9-Hydro

Note: This batch ships out from October 5th after we received payment.  (first-order-first-paid.)
Note: Your order is only final after we confirmed it by sending the invoice.
Note: Order without VAT (0%) with a EU company VAT number or by ordering from outside EU
Note: The price of bitcoin mining machines must be adjusted frequently according to many factors, including Bitcoin/USD exchange rate, the network difficulty, and expected difficulty increase. Refund requests based on price changes cannot be honored.
Note: Up to two years warranty instead of 180 days.

Notifications

  1. Please click here for the installation guide. Suggested specifications for radiators, accessories and powersupplies that are not purchased from us can be found in the guide.  
  2. We recommend the APW5 to power the Antminer S9-Hydro.
  3. We recommend Radiators & Accessories for S9 Hydro to run the S9-Hydro. 
  4. Please note the stated information if you cannot use a 220 V input for APW5.If you are using a 110 V input for APW5, the rated power is 1300 W and will not be capable to power the S9-Hydro.If you are using a 220 V input, the rated power will be 2600 W and will be able to power the S9-Hydro. 

Antminer S9-Hydro Specifications

 

Product Glance             Value
Product model S9 Hydro-18.0T
Hashrate, TH/s 18.00
Power efficiency on wall @25°CJ/TH 96.00
Adapted power supply model APW5
Adapted power supply, Watt / Volt 1728W / 220V
 
Detailed Characteristics                 Value
Min Typ Max
Hashrate & Power
Hashrate, TH/s   18.00 18.40
Power efficiency on wall @25°C, J/TH (1-1) 96.0 102.7
Power efficiency on wall @40°C, J/TH (1-2) 103.2 110.4
Power on wall, W (1-3) 1728 2031
Power Supply Input Range
Power supply input voltage, V AC (2-1) 200 220 265
Power Supply input Frequency Range, Hz (2-2) 47 50 63
Power supply input current, A (2-3)   7.85 10.16
Power Supply Safety Protection
Output Overcurrent Protection, A DC (3-1) 216   225
Low Voltage Input Protection, V AC 90   100
Hardware Configuration
Quantity of hash chips 216
Quantity of hash boards 4
Networking connection mode RJ45 ethernet 10/100M
Miner Size (Length*Width*Height), mm(4-1) 360*125*190
Net weight, kg (4-2)   5.15  
Noise, dBA @25°C  (4-3) 45 58
Environment Requirements
Water inlet temperature, °C    15 (5-1)   55
Water flow, L/min    5 (5-2)   15
Flow system pressure, kPa   50 300
Operation temperature, °C 0 25 40
Storage temperature, °C -40 25 85
Operation humidity, RH 5%   95%


Specifications

(1-1) Miner test in 25°C temperature chamber. Heat exchanger and water pump power are included.
(1-2) Miner test in 40°C temperature chamber. Heat exchanger and water pump power are included.
(1-3) Typ condition: 25°C, min J/TH, typical Hashrate
         Max condition: 40°C, max J/TH, max Hashrate
(2-1) Caution: Supply lower than 200V will cause APW5 protection or damage
          Due to APW output power will be reduced by 50% under 200V input, and it is not enough for miner
(2-2) 220V AC Power Supply Frequency|
(2-3) Typ condition: Min Power on wall, 220V AC supply
          Max condition: Max Power on wall, 180V AC supply
(3-1) During 220V AC input
(4-1) Without APW5 & Heat exchanger and water pump, including the bend pipes . APW5 L*W*H(mm) = 260*125*86
(4-2) Without APW5 & Heat exchanger, pump, including the bend pipes, APW5 net weight is 2.5kg
(4-3) Typ condition: 25°C, typical J/TH, typical Hashrate
           Max condition: 40°C, max J/TH, max Hashrate 
(5-1) Temperature should be no less than 15°C, and at least 3°C higher than dew point
(5-2) The external water source can appropriately reduce the flow according to the actual water temperature. Under this condition, the recommendation is no less than 2L/min.

Notes: The use of outdoor water sources (cooling towers, natural water sources) will cool the system more effectively than the Radiators & Accessories. The flow rate can be adjusted accordingly, but it is recommended to be no less than 2L/min. If the flow rate is too low, it will be greatly affected by the system resistance, which may lead to uneven branch flow. 

Antminer S9-Hydro

Antminer S9-Hydro back

Antminer S9-Hydro top

Antminer S9-Hydro with PSU