Antminer V9

Antminer V9 - 4 TH/S

€165,- VAT excl. €199,- VAT incl. Out of stock

Antminer V9 – The cheapest way to get maximum hashpower for each euro! Get discount by ordering multiple units.

Note: Your order can be shipped out within 24 hours after we received payment.
Note: Your order is only final after we confirmed it by sending the invoice.
Note: Order without VAT (0%) with a EU company VAT number or by ordering from outside EU
Note: The price of cryptocurrency mining machines has to be adjusted frequently in accordance with variables like the exchange rate of the cryptocurrency with fiat, the cryptocurrency’s network difficulty, or the expected difficulty increase. Refund requests based on price changes cannot be honored.
Note: Up to two years warranty instead of 180 days.

 

Parameters of ANTMINER V9

No.

Parameters

Value

1

Product model

V9

2

Hash chip type

BM1580

3

Total quantity of hash chips

135 PCS

4

Total quantity of hash boards

3 PCS

5

Total hash rate

4TH ±5%

6

DC voltage input

11.60~13.00 V

7

DC current input @12V DC

79.59 A +10%

8

DC Power @12V DC input

955 W +10%

9 220VAC Power @25℃ ,93%

conversion efficiency of APW3

1027 W +10%

10 220VAC Power efficiency @25℃,93% conversion efficiency of APW3  253mJ/GH+10%
11

Weight(without package)

 3.05 kg

12

Operation temperature

0-40 ℃

13

Storage temperature

-40-85 ℃

14

Operation humidity

5%RH-95%RH,

prevent condensation

15

Noise

76 dB

16

Networking connection mode

Ethernet Cable

17

Power connection mode

All three PCI-E ports are required to power the board. You can use one PSU to power multiple boards, but do not attempt to power one board with two PSUs.We suggest to prevent  the control board to be powered up before hash boards be powered up.

18

Size(Length*Width*Hight,without package)

301mm*123mm*155mm

 

Notes:

Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.

PSU: A power supply unit is not included. You will need an ATX PSU with at least 10 six-pin PCIe connectors. There are 3 six-pin PCIe connectors on each hashing board and all three need to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board. We recommend the APW3++-1600 power supply for use with the Antminer V9. One power supply supports one Antminer V9.

Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10 PCIe connectors are connected to a power supply.

Antminer V9

Antminer V9

Antminer V9