BITMAIN ANTMINER X3, CryptoNight
Note: This batch ships out within 10 days upon receipt of payment. (first-order-first-paid.)
Note: Your order is only final after we confirmed it by sending the invoice.
Note: Order without VAT (0%) with a EU company VAT number or by ordering from outside EU
Note: The price of crypto mining machines must be adjusted frequently according to many factors, including cryptocurrency/USD exchange rate, the network difficulty, expected difficulty increase or changes in the algoritm. Refund requests based on these factors cannot be honored.
Note: Up to two years warranty instead of 180 days.
Antminer X3 Specifications:
| No. |
Parameters |
Value |
| 1 |
Product model |
X3 |
| 2 |
Total quantity of hash chips |
180 pcs |
| 3 |
Total quantity of hash boards |
3 pcs |
| 4 |
Total hash rate |
220 kH/s |
| 5 |
DC voltage input |
11.60~13.00 V |
| 6 |
DC current input @12V DC |
38.8 A +7% |
| 7 |
DC Power @12V DC input |
465 W +7% |
| 8 | 220VAC Power @25℃ ,93%
conversion efficiency of APW3 |
500 W +7% |
| 9 | 220VAC Power efficiency
@25℃,93% conversion efficiency of APW3 |
2.27 J/kH +7% |
| 10 |
Weight（without package） |
5.5 kg |
|
11 |
Operation temperature |
0-40 ℃ |
| 12 |
Storage temperature |
-40-85 ℃ |
| 13 |
Operation humidity |
5%RH-95%RH,
prevent condensation |
| 14 |
Noise |
76 dB |
| 15 |
Networking connection mode |
Ethernet Cable |
|
16 |
Power connection mode |
All three PCI-E ports are required to power the board. You can use one PSU to power multiple boards, but do not attempt to power one board with two PSUs.We suggest to prevent the control board to be powered up before hash boards be powered up. |
| 17 |
Size(Length*Width*Hight,without package) |
334mm*125mm*207mm |
Notes:
Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
PSU: A power supply unit is not included. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required. Do not connect more than one PSU to the same hashing board!
We recommend the APW3++ power supply or APW7 power supply for use with the Antminer X3. One power supply supports one Antminer X3.
Separate power supply to control board: there is one additional six-pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10 PCIe connectors are connected to a power supply.
Antminer X3
Antminer X3