BITMAIN ANTMINER Z9, Equihash SOLD OUT
Note: This batch ships out October 15th – 22th after we received payment. (first-order-first-paid.)
Note: Your order is only final after we confirmed it by sending the invoice.
Note: Order without VAT (0%) with a EU company VAT number or by ordering from outside EU
Note: There are financial risks associated with mining cryptocurrencies. These risks can be related to changes in exchange rate of the cryptocurrency or to changes in the algorithm that is used to mine the cryptocurrency. We would like to reiterate that you should consider carefully before making a purchase.
Note: The price of mining machines must be adjusted frequently according to many factors, including cryptocurrency/USD exchange rate, the network difficulty, expected difficulty increase or changes in the algorithm. Refund requests based on these factors cannot be honored.
Note: Up to two years warranty instead of 180 days.
Antminer Z9 Specifications:
|Reference power on wall, Watt||970|
|Reference power efficiency on wall @25℃, J/KSol||23.1|
|Adapted AC/DC output requirement, Watt / Volt||1201/ 12.00|
|Hashrate & Power|
|Power efficiency on wall @25℃, J/KSol (1-1)||23.1||24.7|
|Power efficiency on wall @40℃, J/KSol (1-2)||24.7||26.4|
|Reference power on wall, Watt (1-3)||970||1162|
|DC input voltage range, Volt (1-4)||11.60||12.00||13.00|
|DC input current range, Amp (1-5)||80.8||100|
|Adapted AC/DC output power requirement, Watt (1-6)||1081||1201|
|Quantity of hash chips||48|
|Quantity of hash boards||3|
|Networking connection mode||RJ45 ethernet 10/100M|
|Miner Size (Length*Width*Hight, w/o package), mm||226*134*277|
|Net weight, kg||4.7|
|Noise, dBA @25℃ (2-1)||70|
|Operation temperature, ℃||0||25||40|
|Storage temperature, ℃||-40||25||85|
|Operation humidity, RH||5%||95%|
PSU: A power supply unit is not included.
You will need an ATX Power supply with sufficient 7 six-pin PCIE connectors. All PCIE connectors on a hashing board need to be connected to the PSU for the hashing board to operate. We recommend the APW3++ or the APW7 to power the Antminer Z9. The power cord is not included, please find one with at least 10A from your local market.
Separate power supply to control board: there is one additional 6 pin PCIE connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 6 pin PCIE connectors are connected to power supply.
The to be shipped products may have a different industrial design than the photo here.
Antminer Z9 side
Antminer Z9 front